( pcb2gcode 2.5.0 )
( Software-independent Gcode )

( This file uses 6 drill bit sizes. )
( Bit sizes: [0.8mm] [1.2mm] [1.4mm] [1.5mm] [1.8mm] [2mm] )

G94       (Millimeters per minute feed rate.)
G21       (Units == Millimeters.)
G91.1     (Incremental arc distance mode.)
G90       (Absolute coordinates.)
G00 S10000     (RPM spindle speed.)

G00 Z10.00000 (Retract)
T1
M5      (Spindle stop.)
G04 P1.00000
(MSG, Change tool bit to drill size 0.8mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)
G0 Z5.00000
G04 P1.00000

G81 R5.00000 Z-2.00000 F200.00000 X25.91500 Y67.72500
X25.96500 Y70.02500
X25.96500 Y75.02500
X25.91500 Y77.72500
X36.52500 Y68.82500
X36.52500 Y76.32500
X44.02500 Y77.02500
X44.02500 Y67.02500
X54.52500 Y67.48500
X54.52500 Y77.48500
X62.02500 Y77.48500
X62.02500 Y75.02500
X62.02500 Y70.02500
X62.02500 Y67.48500
X83.37500 Y76.23500
X83.37500 Y68.73500
G80

G00 Z10.00000 (Retract)
T2
M5      (Spindle stop.)
G04 P1.00000
(MSG, Change tool bit to drill size 1.2mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)
G0 Z5.00000
G04 P1.00000

G81 R5.00000 Z-2.00000 F200.00000 X15.52500 Y57.02500
X15.52500 Y64.52500
X15.52500 Y79.52500
X15.52500 Y79.52500
X25.96500 Y65.02500
X36.51500 Y65.02500
X25.96500 Y80.02500
X36.51500 Y80.02500
X62.02500 Y79.98500
X62.02500 Y64.98500
X72.57500 Y64.98500
X83.32500 Y57.48500
X83.32500 Y64.98500
X72.57500 Y79.98500
X83.32500 Y79.98500
X83.32500 Y79.98500
G80

G00 Z10.00000 (Retract)
T3
M5      (Spindle stop.)
G04 P1.00000
(MSG, Change tool bit to drill size 1.4mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)
G0 Z5.00000
G04 P1.00000

G81 R5.00000 Z-2.00000 F200.00000 X4.02500 Y15.90500
X4.02500 Y23.52500
X95.52500 Y49.52500
X95.52500 Y41.90500
X95.52500 Y30.52500
X95.52500 Y22.90500
X95.52500 Y15.28500
G80

G00 Z10.00000 (Retract)
T4
M5      (Spindle stop.)
G04 P1.00000
(MSG, Change tool bit to drill size 1.5mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)
G0 Z5.00000
G04 P1.00000

G81 R5.00000 Z-2.00000 F200.00000 X17.02500 Y4.72500
X17.02500 Y13.61500
X17.02500 Y17.82500
X17.02500 Y27.05500
X83.02500 Y27.05500
X83.02500 Y18.05500
X83.02500 Y13.82500
X83.02500 Y4.55500
G80

G00 Z10.00000 (Retract)
T5
M5      (Spindle stop.)
G04 P1.00000
(MSG, Change tool bit to drill size 1.8mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)
G0 Z5.00000
G04 P1.00000

G81 R5.00000 Z-2.00000 F200.00000 X25.77000 Y46.52500
X24.68500 Y51.17000
X39.27000 Y46.52500
X40.52500 Y42.02500
X58.10500 Y51.09800
X59.19500 Y46.46500
X72.69500 Y46.46500
X73.94500 Y41.95300
G80

G00 Z10.00000 (Retract)
T6
M5      (Spindle stop.)
G04 P1.00000
(MSG, Change tool bit to drill size 2mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3      (Spindle on clockwise.)
G0 Z5.00000
G04 P1.00000

G81 R5.00000 Z-2.00000 F200.00000 X17.85500 Y46.52500
X46.85500 Y46.52500
X51.52500 Y46.52500
X80.52500 Y46.52500
G80

G00 Z10.000 ( All done -- retract )

M5      (Spindle off.)
G04 P1.000000
M9      (Coolant off.)
M2      (Program end.)