( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S10000 ( RPM spindle speed. )
G64 P0.01016 ( set maximum deviation from commanded toolpath )
G01 F60.00000 ( Feedrate. )


G00 Z10.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to cutter diameter 1.00000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X0.52497 Y1.02502 ( rapid move to begin. )
G01 Z-0.10000 F30.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F60.00000
G01 X0.52497 Y41.27502
G01 X0.52497 Y42.77502
G01 X0.52497 Y83.02501
G01 X0.53460 Y83.12257
G01 X0.56305 Y83.21637
G01 X0.60925 Y83.30281
G01 X0.67143 Y83.37858
G01 X0.74720 Y83.44076
G01 X0.83363 Y83.48696
G01 X0.92744 Y83.51541
G01 X1.02500 Y83.52503
G01 X99.02498 Y83.52503
G01 X99.12251 Y83.51541
G01 X99.21632 Y83.48696
G01 X99.30275 Y83.44076
G01 X99.37852 Y83.37858
G01 X99.44070 Y83.30281
G01 X99.48690 Y83.21637
G01 X99.51535 Y83.12257
G01 X99.52498 Y83.02501
G01 X99.52498 Y42.77502
G01 X99.52498 Y41.27502
G01 X99.52498 Y1.02502
G01 X99.51535 Y0.92748
G01 X99.48690 Y0.83368
G01 X99.44070 Y0.74725
G01 X99.37852 Y0.67148
G01 X99.30275 Y0.60930
G01 X99.21632 Y0.56310
G01 X99.12251 Y0.53465
G01 X99.02498 Y0.52502
G01 X1.02500 Y0.52502
G01 X0.92744 Y0.53465
G01 X0.83363 Y0.56310
G01 X0.74720 Y0.60930
G01 X0.67143 Y0.67148
G01 X0.60925 Y0.74725
G01 X0.56305 Y0.83368
G01 X0.53460 Y0.92748
G01 X0.52497 Y1.02502
G01 Z-0.20000 F30.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F60.00000
G01 X0.52497 Y41.27502
G01 X0.52497 Y42.77502
G01 X0.52497 Y83.02501
G01 X0.53460 Y83.12257
G01 X0.56305 Y83.21637
G01 X0.60925 Y83.30281
G01 X0.67143 Y83.37858
G01 X0.74720 Y83.44076
G01 X0.83363 Y83.48696
G01 X0.92744 Y83.51541
G01 X1.02500 Y83.52503
G01 X99.02498 Y83.52503
G01 X99.12251 Y83.51541
G01 X99.21632 Y83.48696
G01 X99.30275 Y83.44076
G01 X99.37852 Y83.37858
G01 X99.44070 Y83.30281
G01 X99.48690 Y83.21637
G01 X99.51535 Y83.12257
G01 X99.52498 Y83.02501
G01 X99.52498 Y42.77502
G01 X99.52498 Y41.27502
G01 X99.52498 Y1.02502
G01 X99.51535 Y0.92748
G01 X99.48690 Y0.83368
G01 X99.44070 Y0.74725
G01 X99.37852 Y0.67148
G01 X99.30275 Y0.60930
G01 X99.21632 Y0.56310
G01 X99.12251 Y0.53465
G01 X99.02498 Y0.52502
G01 X1.02500 Y0.52502
G01 X0.92744 Y0.53465
G01 X0.83363 Y0.56310
G01 X0.74720 Y0.60930
G01 X0.67143 Y0.67148
G01 X0.60925 Y0.74725
G01 X0.56305 Y0.83368
G01 X0.53460 Y0.92748
G01 X0.52497 Y1.02502
G01 Z-0.30000 F30.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F60.00000
G01 X0.52497 Y41.27502
G01 X0.52497 Y42.77502
G01 X0.52497 Y83.02501
G01 X0.53460 Y83.12257
G01 X0.56305 Y83.21637
G01 X0.60925 Y83.30281
G01 X0.67143 Y83.37858
G01 X0.74720 Y83.44076
G01 X0.83363 Y83.48696
G01 X0.92744 Y83.51541
G01 X1.02500 Y83.52503
G01 X99.02498 Y83.52503
G01 X99.12251 Y83.51541
G01 X99.21632 Y83.48696
G01 X99.30275 Y83.44076
G01 X99.37852 Y83.37858
G01 X99.44070 Y83.30281
G01 X99.48690 Y83.21637
G01 X99.51535 Y83.12257
G01 X99.52498 Y83.02501
G01 X99.52498 Y42.77502
G01 X99.52498 Y41.27502
G01 X99.52498 Y1.02502
G01 X99.51535 Y0.92748
G01 X99.48690 Y0.83368
G01 X99.44070 Y0.74725
G01 X99.37852 Y0.67148
G01 X99.30275 Y0.60930
G01 X99.21632 Y0.56310
G01 X99.12251 Y0.53465
G01 X99.02498 Y0.52502
G01 X1.02500 Y0.52502
G01 X0.92744 Y0.53465
G01 X0.83363 Y0.56310
G01 X0.74720 Y0.60930
G01 X0.67143 Y0.67148
G01 X0.60925 Y0.74725
G01 X0.56305 Y0.83368
G01 X0.53460 Y0.92748
G01 X0.52497 Y1.02502
G01 Z-0.40000 F30.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F60.00000
G01 X0.52497 Y41.27502
G01 X0.52497 Y42.77502
G01 X0.52497 Y83.02501
G01 X0.53460 Y83.12257
G01 X0.56305 Y83.21637
G01 X0.60925 Y83.30281
G01 X0.67143 Y83.37858
G01 X0.74720 Y83.44076
G01 X0.83363 Y83.48696
G01 X0.92744 Y83.51541
G01 X1.02500 Y83.52503
G01 X99.02498 Y83.52503
G01 X99.12251 Y83.51541
G01 X99.21632 Y83.48696
G01 X99.30275 Y83.44076
G01 X99.37852 Y83.37858
G01 X99.44070 Y83.30281
G01 X99.48690 Y83.21637
G01 X99.51535 Y83.12257
G01 X99.52498 Y83.02501
G01 X99.52498 Y42.77502
G01 X99.52498 Y41.27502
G01 X99.52498 Y1.02502
G01 X99.51535 Y0.92748
G01 X99.48690 Y0.83368
G01 X99.44070 Y0.74725
G01 X99.37852 Y0.67148
G01 X99.30275 Y0.60930
G01 X99.21632 Y0.56310
G01 X99.12251 Y0.53465
G01 X99.02498 Y0.52502
G01 X1.02500 Y0.52502
G01 X0.92744 Y0.53465
G01 X0.83363 Y0.56310
G01 X0.74720 Y0.60930
G01 X0.67143 Y0.67148
G01 X0.60925 Y0.74725
G01 X0.56305 Y0.83368
G01 X0.53460 Y0.92748
G01 X0.52497 Y1.02502
G01 Z-0.50000 F30.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F60.00000
G01 X0.52497 Y41.27502
G01 X0.52497 Y42.77502
G01 X0.52497 Y83.02501
G01 X0.53460 Y83.12257
G01 X0.56305 Y83.21637
G01 X0.60925 Y83.30281
G01 X0.67143 Y83.37858
G01 X0.74720 Y83.44076
G01 X0.83363 Y83.48696
G01 X0.92744 Y83.51541
G01 X1.02500 Y83.52503
G01 X99.02498 Y83.52503
G01 X99.12251 Y83.51541
G01 X99.21632 Y83.48696
G01 X99.30275 Y83.44076
G01 X99.37852 Y83.37858
G01 X99.44070 Y83.30281
G01 X99.48690 Y83.21637
G01 X99.51535 Y83.12257
G01 X99.52498 Y83.02501
G01 X99.52498 Y42.77502
G01 X99.52498 Y41.27502
G01 X99.52498 Y1.02502
G01 X99.51535 Y0.92748
G01 X99.48690 Y0.83368
G01 X99.44070 Y0.74725
G01 X99.37852 Y0.67148
G01 X99.30275 Y0.60930
G01 X99.21632 Y0.56310
G01 X99.12251 Y0.53465
G01 X99.02498 Y0.52502
G01 X1.02500 Y0.52502
G01 X0.92744 Y0.53465
G01 X0.83363 Y0.56310
G01 X0.74720 Y0.60930
G01 X0.67143 Y0.67148
G01 X0.60925 Y0.74725
G01 X0.56305 Y0.83368
G01 X0.53460 Y0.92748
G01 X0.52497 Y1.02502

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z10.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )