diff --git a/TWANG32/config.h b/TWANG32/config.h
index 7e184b6..9d97903 100644
--- a/TWANG32/config.h
+++ b/TWANG32/config.h
@@ -1,37 +1,40 @@
 /*
-	TWANG32 - An ESP32 port of TWANG
-	(c) B. Dring 3/2018
-	License: Creative Commons 4.0 Attribution - Share Alike	
-	
-	TWANG was originally created by Critters
-	https://github.com/Critters/TWANG
-	
-	Basic hardware definitions
-	
-	Light Strip Notes:
-	
-	Noepixel / WS2812
-		- Low Cost
-		- You might already have a strip.
-		- No Clock Line - This means a fixed and relatively slow data rate and only shorter strips can be used
-		- Poor Dynamic Range - The low end of brightness is basically not visible
-	Dotstar (Highly recommended)
-	  - Higher Cost
-		- Higher speed - Longer strips can be used.
-		- Great dynamic range, so lower levels and more colors can be used.
-	
+    TWANG32 - An ESP32 port of TWANG
+    (c) B. Dring 3/2018
+    License: Creative Commons 4.0 Attribution - Share Alike
+
+    TWANG was originally created by Critters
+    https://github.com/Critters/TWANG
+
+    Basic hardware definitions
+
+    Light Strip Notes:
+
+    Noepixel / WS2812
+        - Low Cost
+        - You might already have a strip.
+        - No Clock Line - This means a fixed and relatively slow data rate and only shorter strips can be used
+        - Poor Dynamic Range - The low end of brightness is basically not visible
+    Dotstar (Highly recommended)
+      - Higher Cost
+        - Higher speed - Longer strips can be used.
+        - Great dynamic range, so lower levels and more colors can be used.
+
 
 */
 
 #ifndef CONFIG_H
-	#define CONFIG_H
+#define CONFIG_H
+
+/* Uncomment below to use the accelerometer base joystic of original implementation */
+//#define USE_GYRO_JOYSTICK
 
 #define DATA_PIN        16
 #define CLOCK_PIN       17
 
 /* Game is rendered to this and scaled down to your strip.
  This allows level definitions to work on all strip lengths  */
-#define VIRTUAL_LED_COUNT 1000  
+#define VIRTUAL_LED_COUNT 1000
 
 // what type of LED Strip....uncomment to define only one of these
 #define USE_APA102
@@ -40,28 +43,28 @@
 
 // Check to make sure LED choice was done right
 #if !defined(USE_NEOPIXEL) && !defined(USE_APA102)
-	#error "You must have USE_APA102 or USE_NEOPIXEL defined in config.h"
+    #error "You must have USE_APA102 or USE_NEOPIXEL defined in config.h"
 #endif
 
 #if defined(USE_NEOPIXEL) && defined(USE_APA102)
-	#error "Both USE_APA102 and USE_NEOPIXEL are defined in config.h. Only one can be used"
+    #error "Both USE_APA102 and USE_NEOPIXEL are defined in config.h. Only one can be used"
 #endif
 
 #ifdef USE_APA102
-  #define LED_TYPE        			APA102
-  #define LED_COLOR_ORDER      	BGR // typically this will be the order, but switch it if not
-  #define CONVEYOR_BRIGHTNESS 	8
-  #define LAVA_OFF_BRIGHTNESS 	4
-	#define MAX_LEDS   						VIRTUAL_LED_COUNT // these LEDS can handle the max
-	#define MIN_REDRAW_INTERVAL  	1000.0 / 60.0    // divide by frames per second..if you tweak, adjust player speed
+    #define LED_TYPE                  APA102
+    #define LED_COLOR_ORDER       BGR // typically this will be the order, but switch it if not
+    #define CONVEYOR_BRIGHTNESS   8
+    #define LAVA_OFF_BRIGHTNESS   4
+    #define MAX_LEDS        VIRTUAL_LED_COUNT // these LEDS can handle the max
+    #define MIN_REDRAW_INTERVAL     1000.0 / 60.0    // divide by frames per second..if you tweak, adjust player speed
 #endif
 
 #ifdef USE_NEOPIXEL
-  #define LED_TYPE        		 	NEOPIXEL
-	#define CONVEYOR_BRIGHTNESS 	40  // low neopixel values are nearly off, Neopixels need a higher value
-	#define LAVA_OFF_BRIGHTNESS  	15   // low neopixel values are nearly off, Neopixels need a higher value
-	#define MAX_LEDS 						 	288  // Neopixels cannot handle the framerate
-	#define MIN_REDRAW_INTERVAL  	1000.0 / 60.0    // divide by frames per second..if you tweak adjust player speed
+    #define LED_TYPE                  NEOPIXEL
+    #define CONVEYOR_BRIGHTNESS     40  // low neopixel values are nearly off, Neopixels need a higher value
+    #define LAVA_OFF_BRIGHTNESS     15   // low neopixel values are nearly off, Neopixels need a higher value
+    #define MAX_LEDS                            288  // Neopixels cannot handle the framerate
+    #define MIN_REDRAW_INTERVAL     1000.0 / 60.0    // divide by frames per second..if you tweak adjust player speed
 #endif
 
 // Comment or remove the next #define to disable the /metrics endpoint on the HTTP server.