cesco/bassofono
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

fix interfaccia

Browse Source
This commit is contained in:
nzasch
2022-01-12 01:09:32 +01:00
parent b9a7a1e15b
commit 6d0c31556a
435 changed files with 436215 additions and 10940 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
codice/Drivers/STM32G4xx_HAL_Driver/Src/stm32g4xx_ll_ucpd.c
View File

@@ -6,13 +6,12 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
* Copyright (c) 2019 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
@@ -27,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G4xx_LL_Driver
* @{
@@ -83,7 +82,7 @@ ErrorStatus LL_UCPD_DeInit(UCPD_TypeDef *UCPDx)
/* Check the parameters */
assert_param(IS_UCPD_ALL_INSTANCE(UCPDx));
LL_UCPD_Disable(UCPDx);
if (UCPD1 == UCPDx)
@@ -105,8 +104,9 @@ ErrorStatus LL_UCPD_DeInit(UCPD_TypeDef *UCPDx)
/**
* @brief Initialize the ucpd registers according to the specified parameters in UCPD_InitStruct.
* @note As some bits in ucpd configuration registers can only be written when the ucpd is disabled (ucpd_CR1_SPE bit =0),
* UCPD peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
* @note As some bits in ucpd configuration registers can only be written when the ucpd is disabled
* (ucpd_CR1_SPE bit =0), UCPD peripheral should be in disabled state prior calling this function.
* Otherwise, ERROR result will be returned.
* @param UCPDx UCPD Instance
* @param UCPD_InitStruct pointer to a @ref LL_UCPD_InitTypeDef structure that contains
* the configuration information for the UCPD peripheral.
@@ -117,7 +117,7 @@ ErrorStatus LL_UCPD_Init(UCPD_TypeDef *UCPDx, LL_UCPD_InitTypeDef *UCPD_InitStru
/* Check the ucpd Instance UCPDx*/
assert_param(IS_UCPD_ALL_INSTANCE(UCPDx));
if(UCPD1 == UCPDx)
if (UCPD1 == UCPDx)
{
LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_UCPD1);
}
@@ -167,4 +167,3 @@ void LL_UCPD_StructInit(LL_UCPD_InitTypeDef *UCPD_InitStruct)
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/